Black Diamond® Adhesive Back Vinyl
Product Description: |
Black Diamond® High Gloss water resistant, rapid drying ink jet coating on white calendared vinyl with permanent adhesive on a 90 lb. liner. |
x |
|
Suggested Uses: |
High Impact P.O.P., Signs, Prints, Posters, Decals |
x |
|
Product Code: |
BDABV |
x |
|
|
Roll Dimensions: |
Width (inches) |
Length (feet) |
On 2” cores unless noted. |
24 |
50 |
|
36 |
50 |
|
42 |
50 |
|
44 |
50 |
|
50 |
50 |
|
54 |
50 |
|
24” x 5’ sample rolls or 8.5” x 11” sample sheets are available |
x |
|
Physical Properties: |
Total Weight |
329 g/m² |
|
Thickness |
12.2 mil with Liner Sheet / 6 mil without |
|
Opacity |
93% |
|
Gloss @ 60° |
42 |
|
White Point |
98.9 |
|
Base |
3.2 mil calendered vinyl on a 90 lb. liner with permanent clear adhesive |
|
Finish |
Gloss |
|
Water Resistant |
Yes |
|
Lamination |
Pressure Sensitive, Spray, Thermal, Liquid
For best results, please ensure that the print is encapsulated or the edge is sealed to prevent wicking into the print. |
x |
|
Ink Compatibility: |
Pigment: Epson Ultrachrome K3 , HP Vivera ™, Cannon LUCIA ™ For outdoor display, the use of pigment inks is recommended for fade and water resistance. |
x |
|
|
NOTE: |
This Product Data Sheet is intended to be used as a guideline only. Before using our print media, please verify that it is suitable for use with your printer. IJ Technologies will not assume liability for non-performance of the print media resulting from changes beyond our control in printing inks and/or printers.
Specifications are subject to change without notice. The product will be replaced if defective. No other liability will be accepted and all other warranties and conditions statutory, expressed or implied are excluded. |
|
|
|