 |
DuraGraphix™ Polyart® Double Sided
|
Product Description: |
DuraGraphix™ water resistant ink jet coating on Polyart® synthetic base is durable and has excellent lay flat characteristics. It is environmentally friendly, recyclable and does not crack when folded. This media works well on both desktop and wide format printers. Printable on 2 sides. |
|
x |
|
|
Suggested Uses: |
P.O.P., Maps, Architectural Drawings and Plans, Posters and Trade Show Graphics |
|
x |
|
|
Product Code: |
DGPASS |
|
x |
|
|
|
Roll Dimensions: |
Width (inches) |
Length (feet) |
|
On 2” cores unless noted. |
24 |
100 |
|
|
36 |
100 |
|
|
42 |
100 |
|
|
44 |
100 |
|
|
50 |
100 |
|
|
54 |
100 |
|
|
Cut Sheets Available |
|
|
|
24” x 5’ sample rolls or 8.5” x 11” sample sheets are available |
|
x |
|
|
Physical Properties: |
Total Weight |
150 g/m² |
|
|
Thickness |
8.0 mil |
|
|
Opacity |
84% |
|
|
Gloss @ 60°
White Point |
3.0
116 |
|
|
Base |
4.5 mil polyethylene |
|
|
Tensile Strength (lb/in) |
MD 31; CD 27 |
|
|
Burst Strength (psi) |
74 |
|
|
Lbs/ream@ 25” x 38” |
95 |
|
|
Lamination |
Pressure Sensitive, Spray, Thermal, Liquid
For best results, please ensure that the print is encapsulated or the edge is sealed to prevent moisture wicking into the print.
|
|
|
Finish |
Matte |
|
|
Water Resistant |
Yes |
|
x |
|
|
Ink Compatibility: |
Aqueous Pigment (recommended for image permanence), Ultrachrome™, Dye-based,
Eco-Solvent |
|
x |
|
|
|
NOTE: |
This Product Data Sheet is intended to be used as a guideline only. Before using our print media, please verify that it is suitable for use with your printer. IJ Technologies will not assume liability for non-performance of the print media resulting from changes beyond our control in printing inks and/or printers.
Specifications are subject to change without notice. The product will be replaced if defective. No other liability will be accepted and all other warranties and conditions statutory, expressed or implied are excluded. |
|
|
|
