You are here:Home > Outdoor/Indoor Banner Media by IJ Technologies > DG Low Tack Adhesive Back Vinyl
Sort By:
Page of 1
DG Low Tack Adhesive Backed, 24 in X 5 ft- sample Roll NOT AVAILABLE DG Low Tack Adhesive Backed, 24 ft n X 50 ft Roll- 12 mils with low tack clear adhesive (ITEM NO LONGER AVAILABLE) DG Low Tack Adhesive Backed, 36 ft n X 50 ft Roll- 12 mils with low tack clear adhesive
DuraView 8 Mil Front-Print, Back-lit Film 24 in X 5 ft - Roll. A film that is reflective and transmissive permitting viewing in daylight and backlighting in darkness. Media is a front print, outdoor media.Overnight Drying Recommended. DG  Low Tack Adhesive Backed, 24 ft n X  50 ft Roll- 12 mils with low tack clear adhesive
DG Low Tack Adhesive Backed, 42 ft n X 50 ft Roll- 12 mils with low tack clear adhesive DG Low Tack Adhesive Backed, 44 ft n X 50 ft Roll- 12 mils with low tack clear adhesive DG Low Tack Adhesive Backed, 54 ft n X 50 ft Roll- 12 mils with low tack clear adhesive
DG  Low Tack Adhesive Backed, 42 ft n X  50 ft Roll- 12 mils with low tack clear adhesive DG  Low Tack Adhesive Backed, 44 ft n X  50 ft Roll- 12 mils with low tack clear adhesive DG  Low Tack Adhesive Backed, 54 ft n X  50 ft Roll- 12 mils with low tack clear adhesive
DG Low Tack Adhesive Backed, 50 ft n X 50 ft Roll- 12 mils with low tack clear adhesive
DG  Low Tack Adhesive Backed, 50 ft n X  50 ft Roll- 12 mils with low tack clear adhesive
   
 

DuraGraphix Low Tack Adhesive Vinyl

Product Description:

DuraGraphix™ water resistant ink jet coating on white calendared vinyl with low tack removable adhesive on a 90 lb. liner.

Suggested Uses:

P.O.P., Signs, Banners, Prints, Posters, Decals

Product Code:

DGRLT

Roll Dimensions:

Width (inches)

Length (feet)

On 2" cores unless noted.

24

50

36

50

42

50

44

50

50

54

50

50

24" x 10’ sample rolls or 8.5" x 11" sample sheets are available

Physical Properties:

Total Weight

306 g/m²

Thickness

12.3 mil with Liner Sheet / 6 mil without

Opacity

95%

Gloss @ 60°

2.8

White Point

Base

126

3.2 mil white vinyl on a 90 lb. liner with low tack removable clear adhesive

Finish

Water Resistant

Application Temp.

Service Temp.

180º Peel Adhesion

Lamination

Matte

Yes

Minimum 40º F

40º F to 200º F

½ hour – 14 ozs. PSTC-1

24 hour – 18 ozs. PSTC-1

Pressure Sensitive, Spray, Thermal, Liquid

For best results, please ensure that the print is encapsulated or the edge is sealed to prevent wicking into the print.

Ink Compatibility:

Pigment: Epson UltraChrome K3™, HP Vivera™, Canon LUCIA™, Eco-Solvent

For outdoor display, the use of pigment inks is recommended for fade and water resistance

.

Printer Compatibility:

Epson

7500 / 9500 / 7600 / 9600 / 10600

Epson Stylus Pro

3000 / 5000 / 7000 / 9000 / 10000

3800 / 4800 / 7800 / 9800

4880 / 7880 / 9880 / 11880

7900 / 9900

CanonimagePROGRAF

iPF6000S / iPF6100 / iPF6200

iPF8000S / iPF8100

iPF9000S / iPF9100

Mimak

i

HP

DesignJet 5500

DesignJet Z2100 / Z3100 / Z6100

DesignJet Z3200

JV 4 Series

Roland

HiFi Jet

FJ 52 / FJ 500 / FJ 540 / FJ 600

NOTE:

This Product Data Sheet is intended to be used as a guideline only. Before using our print media, please verify that it is suitable for use with your printer. IJ Technologies will not assume liability for non-performance of the print media resulting from changes beyond our control in printing inks and/or printers.

Specifications are subject to change without notice. The product will be replaced if defective. No other liability will be accepted and all other warranties and conditions statutory, expressed or implied are excluded.